3M™ Ultra S800 Security Window Film · installed by Epic
Micro-layered like ripstop. One standard of attachment.
The 3M security film tested for blast, impact and seismic events — installed anchored to the frame, never film-only.
When glass breaks under impact, flying shards become the danger. Ultra S800’s micro-layered construction flexes to absorb shock and hold glass in place. If you own a piece of ripstop gear — a hunting jacket, a pack, a tent fly — you already understand it: the woven grid stops a tear from running. Ultra S800 is built the same way, in film. A tear that starts in one micro-layer cannot run through the next. Where standard single-layer film tears, S800 holds — multi-threat protection against forced entry, smash-and-grab, blasts, and seismic events.
- Government & federal
- Commercial lobbies
- Schools
- Healthcare
What it does, and what makes it a system.
Ultra S800 is built from many micro-layers of polyester bonded into one 8-mil film, so a tear in one layer does not travel through the next. It is tested across blast, forced-entry and seismic standards, and it is the right choice where an 8-mil film is specified or where a thinner profile matters. Like every security film, it only performs as tested when it is attached to the frame.
Why buildings choose 3M Ultra S800
- Blast protection: Mitigates flying-glass risk in explosions, protecting occupants and assets.
- Seismic protection: Retains broken glass in the frame, reducing injuries and property damage.
- Forced-entry resistance: Holds broken glass in the frame under repeated impact, making it more difficult for an intruder to break in.
- UV protection: Blocks 99.9% of UV rays to protect furnishings and interiors.
- Optically clear: No tint or color shift — building appearance unchanged.
How Epic installs this film
Epic installs Ultra S800 the same way it installs 3M S2400: precision-cut and kitted off-site, bonded to the glass by Epic-employed Certified Installation Specialists, and anchored to the frame with a continuous structural silicone attachment. The attachment is what keeps the pane in the opening after the glass breaks.
What sets 3M Ultra S800 apart
- Ripstop, in film form — Like ripstop fabric, the micro-layers stop a tear from running — the engineering behind 3M’s tear resistance.
- Micro-layered construction — Micro-layers flex to absorb impact — standard single-layer films tear where S800 holds.
- Multi-threat rated — Blast, break and entry, safety glazing, and seismic.
- 8-mil strength — 1,075 lbs tear resistance (3M family card) · 31,500 psi tensile strength.
- 3M certified performance — Verified by independent third-party labs.
- Patent-pending Epic Method installation — Maximizes S800 performance under real-world impact.
3M Ultra S800 rating
3M Ultra S800, rendered on the actual windows.
Drag the handle. Only the glass changes; the bars show how much light and heat still come through with this film. Switch shades or series to compare.
Shades are grouped by light through the glass. Pick a series to narrow the list.
Drag the handle on the photo to compare.
Rendering is computed from the film’s published optical values applied only to the glass in each photo (clear-glass baseline: 88% VLT, 8% exterior reflectance). This is a simulation; actual appearance varies with glass type, sun angle and shade — we put real samples on your real glass before you decide.
See all four visualizers — frost, graphics and architectural finishes (3M DI-NOC) too
What does 3M Ultra S800 save on your building?
Enter your glass by elevation, your HVAC and your electricity rate — the estimator ranks every 3M film for your climate, 3M Ultra S800 included. The full analysis adds payback from a quoted price on your actual glass.
The numbers.
Per 3M published data. Values vary by shade and glass type; representative shade shown. No window film is bulletproof or bullet-resistant.
Epic spec card: 3M Ultra S800
Two pages: performance, what sets it apart, ratings, physical properties, test standards, and Epic’s installation note.
Best for
- Government & federal
- Commercial lobbies
- Schools
- Healthcare
- Seismic zones
3M Ultra S800 vs 3M S2400: which one, and when
Both are 3M security films, and both need the IPA attachment for forced-entry, windstorm and blast work. They are built differently, so they solve different problems.
Choose 3M S2400 when
The threat is a person at the glass. Entry doors, vestibules and storefronts that may take repeated strikes. 3M S2400 is polyurethane: it stretches (560% elongation, per 3M) instead of tearing.
Choose 3M Ultra S800 when
The specification calls for blast or windstorm performance, an 8-mil film or a thinner profile. Micro-layer polyester stops a tear from running, and 3M lists blast and large-missile windstorm results with IPA. 3M limits blast use to commercial and non-educational government facilities, and Ultra S800 is not approved in Florida for hurricane, windstorm or impact protection.
| 3M S2400 | 3M Ultra S800 | |
|---|---|---|
| Material | Polyurethane (TPU) | Micro-layer polyester |
| Thickness | 24 mil film; 25 mil with adhesive (3M data sheet) | 8 mil film; 9 mil with adhesive (3M data sheet) |
| Visible light transmitted | 89% | 88% |
| UV | 99% rejected | Under 1% transmitted |
| Tests 3M lists | UL 972 impact · ASTM F1642 and GSA TS01 blast · ANSI Z97.1 and EN 12600 safety glazing | ASTM F1642 and GSA TS01 blast · ASTM E1996 and E1886 windstorm · ANSI Z97.1 safety glazing |
| Attachment | IPA required for windstorm, break-and-entry and blast | IPA required for windstorm, break-and-entry and blast |
Per 3M technical data sheets: 3M S2400 Rev. B (April 2025); 3M Ultra S800 Rev. G (January 2025). Both data sheets limit explosion mitigation to commercial and non-educational government facilities. Not sure which fits your openings? Epic specifies it at the free survey. View 3M S2400 →
Also in this family
3M S2400
The only polyurethane security film we know of — every other security film on the market is polyester (PET). About 4X the elongation (560% vs 130%) and two-thirds more Graves tear resistance (24.6 vs 14.8 lbf·in) than a 22-mil PET security film, by 3M’s published data — and installed anchored to the frame with the Epic Method, never film-only.
View →3M Ultra Prestige
The Prestige solar stack bonded to a micro-layered safety film — one installation for heat, UV and glass retention.
View →3M Ultra Night Vision
Night Vision solar performance on a micro-layered safety film — for buildings that need both and do not want a mirror.
View →3M Ultra S800 questions
What is 3M Ultra S800 used for?
Does 3M Ultra S800 need an attachment to the frame?
What does 3M Ultra S800 cost installed?
Is 3M Ultra S800 bulletproof?
On school entries and vestibules, commercial, government and retail glass and homes — always with the Epic Method attachment for forced-entry and blast applications. See it hold on 89 campuses in Colorado, read the district references, or buy through cooperative contracts.
Get a quote on 3M Ultra S800
Tell us the building and the glass. We confirm the right shade and attachment, then send a written estimate.
Ready to see what’s possible on your glass?
A free on-site assessment. Measurements, film recommendation, and a written estimate — no pressure, no obligation.
